Feature of BJ-918B1 Scrap Cable Wire Stripping Machine
Heavy duty cable stripping machine, very easy to operate.
Turn on the power, the derailleur will drive the principal axis, you can adjust the axis up and down freely, the max available wire diameter can reach 100mm.
Application of BJ-918B1 Scrap Cable Wire Stripping Machine
Diameter from 1.5mm to 120mm
This cable stripping machine is the best choice for small recycler of cable recycling.
Cut the waste cable into 1-2 meters.
Put the waste cable into the hole of cable stripper.
Cable stripped will go out from another side.
Specifications of BJ-918B1 Scrap Cable Wire Stripping Machine
Daily production quantity: 200 ~ 8000Kg
Size: L 93*W 55*H 128cm
Power supply: 380V/4KG
Weight: 260kg
Cautions of BJ-918B1 Scrap Cable Wire Stripping Machine
Please do take more care to protect your hand from hurt during working, you should add safety cover to the middle part of the machine.
Please do not use very strong pressure to process your wires, or it will affect the useful life.
If the machine can not move after feeding wires, please check if the strap gets loosed, if the pressure is too strong, and if the position of the blade is right.
If you use this machine working continuously all days, please add some oil to the derailleur and other moving parts per 3 months.
Please check the axis at a time per month, you should repair it in time if it gets damaged.
Functions and features of BJ-918B1 Scrap Cable Wire Stripping Machine
Functions and features of the cable stripper machine: light, low noise, peel, and strip, especially for cutting flat wire with soft silk, plug wire and the wire with inner core 2, 3 or 4 roots of round cable which can be stripped easily.
Please be sure that the joint parts of the feeding material have been cut off when feeding to avoid damaging the blades of the cable stripper. Before using the cable stripper, please adjust the machine first and debugging, don't start the motor.
Please fix and tighten the parts of the screw if the out material can be separated. Then start the motor and recognize every part of the hole and feed it by the root.
Comparing with other machines, the cable stripper machine is relatively complex. But if adjusted appropriately, the effect and the benefit are considerable.
The blade of the stripper machine should be regulated and grinded as it is. If so the cable stripper can be operated easily.
If the copper wire and rubber or plastic cannot be separated completely, please pay attention as below:
Choose the right feeding hole, adjust the positioning fixture via the diameter of cable
Adjust the gap between the drove-gears according to the diameter of the cable.
Basically, the gap should be smaller than the diameter of the cable.
Keep both sides of the long blades to be symmetrical, as well as the long blades and the position of the fixture.
