Optional Features of BJ-513 Semi-Automatic 0val Double Sides Labeling Machine
Reader: Read 2D codes, bar codes and other information, establish products' database for products' traceability.
All-purpose Electric Eyes: General electric eyes cannot detect transparent labels, Leuze Electric Eye imported from Germany should be chosen to be supportive.
Ink-jet printer: Can be equipped with the mainstream ink-jet printer in the market, print at the specified location on the label, which can be combined with labeling machines perfectly.
Coder: Use thermal coder to print production date, expiration date, batch number and other information.
Whole View of BJ-513 Semi-Automatic 0val Double Sides Labeling Machine
The Brake of Feed Tray
The prevention of over labeling
Ready to put on label volumes
Shrapnel to Press the Label
Press the label to ensure the label's tension
For label's detour
Label Detecting Electric-eye
Detect the label
The Material Receiving Machine
Recycle the label's backing sheet
'T' Shape Handle
Fasten the drawing mechanism
By pulling the backing sheet, peel off the label, the degree of tightness can be adjusted
Electric Controlling Box
Used for the electric circuit configuration of the machine
Used to put on workpiece
Air Blowing Pipe
Hold up the label and transit it to the sucker successfully in the process of label peeling
Used to finish the action of labeling
Fine Adjustment Screw
Small adjustment for sucker and the height of workpiece
Film to Press the Label
Guarantee the tension of the label
Provide power to the label belt
Rear view of BJ-513 Semi-Automatic 0val Double Sides Labeling Machine
Air Blowing Pipe 2.Pedal Interface 3.Standby Port 4. Standby Port 5.Air Pipe Interface 6.Barometer 7.Air Pressure Governor
Scope of BJ-513 Semi-Automatic 0val Double Sides Labeling Machine
Working Process of BJ-513 Semi-Automatic 0val Double Sides Labeling Machine
Core working principle: When the sensor detects the product or receives the signal sent from the pedal, the sucker which is sucking the label falls to label and covers the product, and then goes back to the original location to suck the next label and wait for the next label signal. The whole movements of the labeling have been finished.
Procedure: Put the product -> Judge if the product arrives (controlled by the detecting equipment or manually)-> Label and cover it(the device can achieve it automatically)->Remove the labeled products.
The following is the process of making the label for a semi-automatic plane positioning machine.
(It can be sent directly to the label manufacturer for label production):
Distance between every two labels is 2-4mm
Use glassine paper
Inner diameter of label roll: 76mm, outer diameter: less than 260mm
1. The distance between every two labels is 2-4mm;
2. The labels' backing paper is made from glassine material because this paper has good toughness in order to prevent being pulled apart
3. The inner diameter of label roll is 76mm, the outer diameter is less than 260mm, arranged in a single row.
The process of making label above should be combined with your products. The specific requirements please refer to the result of communication with our engineers!
Functional Features of BJ-513 Semi-Automatic 0val Double Sides Labeling Machine
Powerful features can be used for many kinds of workpiece labeling, such as plane, arc surface, concave plane and irregular workpiece
Accurate when labeling, high stability, using PLC+ stepper motor drive to send label exactly; The feed tray that matched with brake function to make sure the tightness of the label belt, to ensure the accuracy of label detection; The label goes around the correction mechanism to prevent the label moving from left to right.
Strong and durable. Electric circuit and gas circuit are arranged separately. The gas circuit is matched with clean-up device to avoid the water in the air to damage the electrical equipment, lengthening its life; The whole machine is mainly made of stainless steel and high-quality aluminum alloy.;
Convenient adjustment, it has a device which can adjust the height to fit different heights' need and need not change the tools frequently.
Beautiful shape. The bottom of the labeling machine is an electric box, equipped with stainless steel and high-quality aluminum alloy, making it elegant and high-class;
Equipped with two ways to label: manual and automatic, the worker can achieve labeling- control through sensor or pedal; Setting manual or automatic control button, and the length of the label can be controlled optionally.
Optional features and components: Thermal coding or inkjet, deliver products automatically, gather the products automatically(considered with products); special electric eye for labeling
Kunshan Bojin Trading Co., Ltd., established in 1998, is a leading manufacturer & exporter of various package machines, wire harness processing machines and other small automation machines. Read More »